Product catalog
Read the ZHR-P14 catalog page with electrical, mechanical and operating data.
Open ZHR-P14 catalog page ↗Integrated motion · Planetary joint series
ZHR-P14: Integrated Planetary Servo Joint Module
ZHR-P14 combines a planetary transmission and servo drive in a robot joint module with 5 Nm rated torque and 14 Nm peak torque. Explore the actual product, mounting drawing and detailed specifications below.
- Rated torque
- 5 Nm
- Peak torque
- 14 Nm
- Catalog weight
- 310 g
Model-specific configuration review · Direct engineering contact
01 / Product overview
Understand the model before design-in.
Quick answer: consider ZHR-P14 for compact dynamic motion where the mechanical envelope and application conditions fit the selected model. Validate the complete duty cycle, mechanical envelope and interface with engineering before release.
ZHR-P14 sits between ZHR-P05 and ZHR-P17 in the published torque range. Compare its 5 Nm rated and 14 Nm peak torque with your load requirements rather than selecting by the model number alone.
Engineering boundary
Encoder, backlash and communication configuration are model-specific. ZHR-P60 is CAN only and does not support native EtherCAT.
Torque values are model-specific. Confirm the duty cycle, thermal conditions, interface and mechanical drawing before design-in.
Select an image to inspect the original product photograph in a new tab.
02 / Technical data
Public specification summary
Review the model parameters below. Download the catalog for complete technical documentation and configuration details.
Download Catalog (PDF) ↓| Parameter | Published value |
|---|---|
| Rated torque | 5 Nm |
| Peak torque | 14 Nm |
| Weight | 310 g ± 3 g |
| Reduction Ratio | 10 : 1 |
| Drive Method | FOC |
| Encoder Type | Magnetic Encoder (2 pcs) |
| Rated Voltage | 48 V |
| Operation Voltage Range | 24 - 60 VDC |
| Rated Output Power | 50 W ± 10% |
| No-load Speed | 315 rpm ± 10% |
| Rated Load Speed | 100 rpm ± 10% |
| Rated Load Phase Current | 4.7 Apk ± 10% |
| Peak Phase Current | 15.5 Apk ± 10% |
| Communication interface | Confirm the interface and configuration with engineering before design-in. |
Communication boundary: Communication: model-specific; contact engineering to confirm the interface before design-in. ZHR-P60 is CAN only and does not support native EtherCAT.
03 / Mechanical integration
ZHR-P14 dimensions & mounting
Inspect the model-specific mounting interfaces before designing the mating parts.
Before you freeze the mechanical design
- Mounting pattern: verify locating features, fixing-hole pattern and fastener engagement against the drawing.
- Clearance: account for the housing, connector access and cable routing in the assembly.
- External loading: provide radial and axial loads, shock conditions and the load-side inertia for review.
Validate the operating cycle
- Torque and speed: provide the load profile and acceleration demands, including peak duration.
- Thermal conditions: specify ambient temperature, cooling and continuous operating time.
- Controls: confirm the bus, encoder configuration and controller compatibility before ordering.
04 / Engineering resources
Documents and next step
Use the series specification page for the current public drawings and data. Request model-specific documents, configuration confirmation and quotation with your application conditions.
Public specification sheets
Check the current series documentation alongside the model drawing and comparison data.
View series spec sheets →Request your model files
Ask for the current ZHR-P14 STEP model, interface confirmation and quotation for your configuration.
Request engineering review for ZHR-P14 →05 / Compare the range
Find the right ZHR-P torque range.
Compare published ratings first, then validate speed, packaging and controls. Weight alone does not determine application suitability.
| Model | Rated torque | Peak torque | Weight | Model page |
|---|---|---|---|---|
| ZHR-P05 | 1.6 Nm | 5.5 Nm | 191 g | View model details |
| ZHR-P14 | 5 Nm | 14 Nm | 310 g ± 3 g | Current model |
| ZHR-P17 | 6 Nm | 17 Nm | 380 g ± 3 g | View model details |
| ZHR-P36 | 11 Nm | 36 Nm | 621 g | View model details |
| ZHR-P60 | 20 Nm | 60 Nm | 900 g ± 20 g | View model details |
| ZHR-P120 | 40 Nm | 120 Nm | 1420 g ± 20 g | View model details |
06 / Engineering questions
ZHR-P14 selection FAQs
What are the rated and peak torque values of ZHR-P14?
ZHR-P14 is listed at 5 Nm rated torque and 14 Nm peak torque. Peak torque is not a continuous operating rating. Confirm allowable peak duration, duty cycle and thermal conditions with engineering.
What supply voltage does ZHR-P14 use?
The catalog lists 48 V rated voltage. Check the operating voltage range and power supply requirements in the specification table before integration.
Which communication interface does ZHR-P14 support?
Confirm the interface and configuration with engineering before design-in.
How do I obtain ZHR-P14 dimensions and STEP CAD?
Use the model-specific dimensional drawing on this page and the linked specification catalog for initial layout. Request the current ZHR-P14 STEP model and configuration confirmation through the engineering RFQ link before releasing your mechanical design.
How should I compare ZHR-P14 with adjacent ZHR-P models?
ZHR-P14 sits between ZHR-P05 and ZHR-P17 in the published torque range. Compare its 5 Nm rated and 14 Nm peak torque with your load requirements rather than selecting by the model number alone.
From specification to integration
Discuss your ZHR-P14 application.
Share your required torque and speed, duty cycle, supply voltage, control interface and target quantity. Your inquiry carries the ZHR-P14 reference so the engineering team can review the intended configuration.